Bloc Loc’s Flying Geese #7 set contains all three of your favorite rulers; 1 1/2″ x 3″, 2″ x 4″, 3″ x 6″. Trims units to 2″ x 3 1/2″, 2 1/2″ x 4 1/2″ and 3 1/2″ x 6 1/2″. Groove technology locks onto seams for total control–there’s no rocking and seams go where they should. Trims flying geese and square in a square units quickly, easily and best of all, they’re fun! | Contains 3 Rulers

Bloc Loc’s Flying Geese Set #6 contains 1″ x 2″, 1 1/2″ x 3″, 2″ x 4″ rulers that lock onto the seams for instant ruler placement, control so that the seam end in the corners and trims the correct amount across the tip. No more wobbling, either! Once the unit is completed and trimmed, it will measure 1 1/2″ x 2 1/2″, 2″ x 3 1/2″ or 2 1/2″ x 4 1/2″. Trims full and partial flying geese, parallelograms, square in a square and many, many other versions of flying geese units. | Contains 3 Rulers

Bloc Loc’s Flying Geese Set #1 contains 1 1/2″ x 3″, 2″ x 4″, 3″ x 6″, 4″ x 8″ rulers that lock onto the seam allowance for instant ruler placement, total control so that the seams end in each corner and trims the correct amount across the tip. Ruler rock is gone, too. Once a unit is completed and trimmed, it will measure 2″ x 3 1/2″, 2 1/2″ x 4 1/2″, 3 1/2″ x 6 1/2″ or 4 1/2″ x 8 1/2″. Trims full and partial flying geese, parallelograms, square in a square and many, many other versions of flying geese units. | Contains 4 Rulers

Bloc Loc’s Half-Square Triangle ruler 8 1/2″ x 8 1/2″ locks onto the seams for instant ruler placement, control so that the seams end in each corner and trims 90% faster than a flat ruler. Ruler rock is gone, too! Also trims quarter-square triangles, birds in the air, y-blocks, LeMoyne Star, double windmill, hidden square units and much, much more. HST ruler is multi-sized and trims in 1/8″ increments. | Contains 1 Ruler: 8.5"

Bloc Loc’s Half-Square Triangle ruler 8 1/2″ x 8 1/2″ locks onto the seams for instant ruler placement, control so that the seams end in each corner and trims 90% faster than a flat ruler. Ruler rock is gone, too! Also trims quarter-square triangles, birds in the air, y-blocks, LeMoyne Star, double windmill, hidden square units and much, much more. HST ruler is multi-sized and trims in 1/8″ increments. | Contains 1 Ruler: 8.5"

Bloc Loc’s Half-Square Triangle Set #6 contains 2 1/2″ & 4 1/2″ rulers that lock onto the seam for instant ruler placement, control so that the seam ens in each corner and trims 90% faster than a flat ruler. Ruler rock is gone, too! Also trims quarter-square triangles, birds in the air, y-blocks, LeMoyne Star, double windmill, hidden square units and much, much more! HST ruler is multi-sized and trims in 1/8″ increments. | Contains 2 Rulers: 2.5" and 4.5"

Bloc Loc’s Half-Square Triangle Set #5 contains 4 1/2″, 5 1/2″ & 6 1/2″ rulers that lock onto the seam for instant ruler placement, control so that the seam ends in each corner and trims 90% faster than a flat ruler. Ruler rock is gone, too! Also trims quarter-square triangles, birds in the air, y-blocks, LeMoyne Star, double windmill, hidden square units and much, much more. HST rulers are multi-sized and trim in 1/8″ increments. | Contains 3 Rulers: 4.5", 5.5", and 6.5"

Bloc Loc’s Half-Square Triangle Set #1 contains 1 1/2″, 2 1/2″, 3 1/2″, 4 1/2″, 5 1/2″ & 6 1/2″ rulers that lock onto the seam for instant ruler placement, control so that the seams end in each corner and trims 90% faster than a flat ruler. Ruler rock is gone, too! Also trims quarter-square triangles, birds in the air, y-blocks, LeMoyne Star, double windmill, hidden square units and much, much more! HST ruler is multi-sized and trims in 1/8″ increments. | Contains 6 Rulers: 1.5", 2.5", 3.5", 4.5", 5.5", and 6.5"

Use the Hot Ruler to measure, mark, fold, press: deep hems, long hems, miter corners.

Measure, mark, fold, press: deep hems, long hems, miter corners and home decor. Heat resistant, press directly on the ruler. Can be used with dry or steam iron. Unique non-slip surface holds fabric in place for precise results. Size: 4 x 14 in How to Use: Fold fabric over ruler, match edge to size needed, press Fold corner to match miter line, press Use ruler to mark hem size, place ruler at mark, fold fabric and press

Perfect 3 in 1 (needle puller+cutter+thimble). Ideal for hand sewing heavy weight. It has an ergonomic design that prevents pain and soreness in fingers since the puller does the needle grabbing for you. Also helps to allow for more multiple stitches at one time to be carried on the needle. No more pulling the needle through with scissors or straining your fingers.

Introducing the first truly left-handed square ruler on the market! Now you can experience all of the great features of the most popular Creative Grids ruler, but printed specifically for lefties! The markings on this 6 1/2 inch square are a mirror image of our right-handed ruler so lefties will no longer have to deal with numbers that are upside down and reversed! This 6-1/2 square ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature — designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides — to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks. The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! Scan the QR Code printed on the ruler to view a tutorial of these features. Total Size - 6-1/2in x 6-1/2in Creative Grids® products are made in the USA and sold through independent quilt shops as well as select online retailers.

The Dritz tailor’s ham is a handy pressing tool used for pressing and molding darts, sleeve caps and curved seams. - Use plaid side (65% cotton/35% polyester) for woolens, synthetic blends & fabrics requiring low to medium temperatures. - Use cotton side (100% cotton) for cotton, linen & fabrics requiring medium to high temperatures. Warning: Cancer - www.P65Warnings.ca.gov Color: Red and Green Made of: Cotton and Polyester Use: Pressing Seams Included: One Roll

Point Presser and Clapper by Golden Hands Industries Use clapper to flatten bulky facing / collar edges; pleats; button holes. Use point presser section for pressing narrow, hard to reach seams of collars; facings; belts; cuffs; corners; points, etc. Approx. 9"

MagnaFingers is a magnetic pick-up tool for pins and needles that easily releases items so you don't hurt your fingers! - Strong Pick-up: Grabs items even in carpet, even things you can't see, using the strongest level of ceramic magnet (level 8) - Strong Hold: Holds over 100 straight pins - Easy Release: Releases so that you don't hurt your fingers on sharp pins and needles - Simple Function: Operates like a clothespin, with only two fingers - Releasing Pin Cushion: Drop pins on it as you sew, then release when you're finished - Multi-use: Also good for paperclips and staples, fish hooks, lost screws, and more - Teen-Invented: Invented and patented by 13-year-old Owen Cowan who spilled fish hooks on his carpet. - 3D printed: Small batch manufacturing gives us flexibility to offer fun colors Color: Blue Made of: Plastic and Metal Use: Magnetic Pick up and Release Included: One Tool

MagnaFingers is a magnetic pick-up tool for pins and needles that easily releases items so you don't hurt your fingers! - Strong Pick-up: Grabs items even in carpet, even things you can't see, using the strongest level of ceramic magnet (level 8) - Strong Hold: Holds over 100 straight pins - Easy Release: Releases so that you don't hurt your fingers on sharp pins and needles - Simple Function: Operates like a clothespin, with only two fingers - Releasing Pin Cushion: Drop pins on it as you sew, then release when you're finished - Multi-use: Also good for paperclips and staples, fish hooks, lost screws, and more - Teen-Invented: Invented and patented by 13-year-old Owen Cowan who spilled fish hooks on his carpet. - 3D printed: Small batch manufacturing gives us flexibility to offer fun colors Color: Blue Made of: Plastic and Metal Use: Magnetic Pick up and Release Included: One Tool

A brand new shape created to give you a perfect fit. The first ever finger-shaped leather thimble, from 3-dimenstional stitching technology. No seams or stitches where the needle hits the thimble, allowing the needle to be pushed from the most convenient spot. The unique shape creates a smooth curve from the edge of the fingertip to the middle of the finger. A cozy, natural fit.

2in Hexagon English Paper Piecing Set • Save time with coordinating punch & acrylic templates for faster paper and fabric shape creation • Squeeze punch lets you create unlimited paper templates • Matching acrylic shapes lets you cut consistent fabric shapes ¼” larger then the punch shape • Portable platforms allow you to create anywhere